NEW

Compact Trough Drinker 200 cm in Stainless Steel

Compact trough drinker for wall fixation, sufficient for 30 – 40 animals
Completely made of stainless steel
Water flow of up to 40 l/min permits a continual and efficient watering of the animals
¾" male connection, possible from right hand side
With drainage for quick evacuation (Ø 100 mm), with a plug security against pulling out by the animals.
The drain is positioned slightly off-center so that the trough drinker can be mounted central in a partition.
Contents 120 l

Heating element 24 V, 180 W (Ref. 131.6194), with heating spiral 24 V, 180 W
Easy fixation under the trough
Frost protection down to -20°C
To ensure a frost-free feed pipe, a frost protection heating cable 24 V, 20 W, 2 m (Ref. 101.0861), or a 24 V, 30 W, 3 m (Ref. 101.1863) has to be used. This heating cable is connected parallel to the heating spiral of the heating element. Plastic pipes have to be wrapped first with an aluminium adhesive tape.
For extremely cold areas a valve heating (24 V, 7 W, Ref. 131.0527) is recommended for increased frost protection.
For power supply a SUEVIA transformer 230/24 V is necessary. For automatic switch on/off of transformer a thermostat (Ref. 101.0389) can be additionally installed.

¾" circuit pipe in stainless steel (Ref. 131.6195) suited for installation. If connected to a water circuit and in combination with a SUEVIA heating unit, frost protection is reached for the water line as well as for the water in the trough.
For connection to a water circuit we recommend a SUEVIA heating unit.

Pressure

max. 5 bar / 72,5 psi (high pressure)

Recommended for

calves, milk cows, cattle, cattle (with anti-suction ring)

Thread size

¾"

Heatable

Yes (electric)

Suitable for circuit

yes

Bowl material

stainless steel